How to avoid the card board problem of veneer dryer

Many people may encounter cardboard problems during the use of dryers. In order to avoid this problem, the following suggestions can be taken:

First of all, keep the equipment clean, clean the dust collector and exhaust pipes, and minimize the accumulation of dust; 

secondly, do a good job of adjusting the equipment to reduce friction and wear of the equipment, and regularly check the state of the roller bearings;

Finally, pay attention to the control of drying temperature and humidity to avoid excessive temperature and humidity, which will cause veneer deformation and board jamming.

It should also be noted that when the workers are placing the boards, they should not place the boards at an angle, especially if the inclination exceeds 45 degrees, and do not place them too far to the side, and do not dry the tertiary boards that are poorly dried.