Roller Jet Veneer Dryer
Our veneer dryer can not only dry the first class board and the second class board and the third class board, and some small defective boards can also be dried. And our new dryer has 35% less power than traditional dryers, which greatly reduces operating costs. High cost performance 、low failure rate and large veneer drying output. Choose shine to provide you with the best veneer dryer drying solution.
Roller Jet Veneer Dryer
The Shine roller veneer dryer can make continuous feeding which can ensure the dryer keep working with no downtime. In this way, the drying efficiency is high and energy consumption is low for thin veneer dryer machine. The wood veneer drying machine is heated by a furnace/burner instead of steam boiler or thermal oil boiler. The core veneer dryer has the lowest drying cost as the biomass burner can directly burn all kinds of waste wood as the fuel. In addition, the double deck veneer dryer line has the salient features of high productivity, energy efficiency and minimum dry cost at affordable price. The dried veneer has the uniform moisture content, flat with no buckle or end waviness and it is in good condition before gluing for plywood making machine.
Shine veneer dryer adopts automatic electric control and frequency conversion system, which can adjust the transmission speed and temperature automatically according to different veneer thickness and moisture content to achieve an ideal drying effect. Equipped with automatic veneer feeder and automatic collection system, which not only improves the drying efficiency but also saves labor cost mostly. The veneer after drying has uniform moisture content and it is flat without buckle or end waviness, free of splits and the surface is in good condition for gluing.Shrinkage and casehardening are kept to a minimum and collapse and honeycomb are avoided.
Product Parameter of Roller Jet Veneer Dryer
Model No | GTH45-56 |
Working Width | 4.5m |
Deck | 2 |
Roller material | Q235B, φ89 steel pipe |
Heating area length | 52m |
Cooling area length | 4m |
Veneer thickness | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/24h) | 120cbm |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power:5.5KW（13pc） |
Traction motor | Power: 7.5KW，frequency control（2pc） |
Cold air blower | Power: 5.5KW（1pc） |
Air intake fan | Power : 15KW（2pc） |
10 ton biomass burner | Power: 16.5KW |
Total power | 139KW |
Actual electricity consumption | About 97kwh per hour |
Covered Space of the whole machine | 62M X 12M X 3M |
Certification
Customer Visiting
Customer Feedback
Packaging & Shipping
