Plywood Dryer Machine
Shine's newly upgraded plywood dryer machine has a 35% reduction in power, minimizing the power consumption of the entire equipment. It adopts fully automatic control and frequency conversion control system, which can automatically adjust the transmission speed and temperature according to different veneer thickness and moisture content to achieve the ideal drying effect. Manual, semi-automatic and fully automatic configurations are available for you to choose from. Meet different wood processing needs.
Plywood Dryer Machine
4 deck plywood dryer machine has the salient features of higher drying capacity.The rollers use φ102 steel special shaft tube.The bearings of 4 deck plywood drying machine are featured high temperature 500 degree Celsius resistance and low temperature -20 degree Celsius resistance which no need injecting oil and easy maintenance in the daily operation.A unique heat exchange structure makes the equipment run efficiently and greatly improves drying output.Biomass burner is our patented product,which can burn waste wood (rotary cutting veneer,waste bark,and waste veneer) directly,heat air,and deliver to the dryer directly without heat loss.The fuel cost is much lower than thermal oil,steam gas,electricity,and others.The composite cost is only about $10/m³.Our biomass burner can pass the inspection and acceptance of the environmental protection department.
The Shine heat exchanger adopts step-by-step heat exchange. The specifications of the heat exchanger in each section are different. The hot air in the heat exchanger can be evenly distributed to the single board. The dried veneer has a uniform moisture content, is smooth, has no wrinkles or end ripples, no cracks, and the surface is in good bonding condition, which fully improves energy utilization and saves unnecessary energy waste.
Product Parameter of Plywood Dryer Machine
Model No | GTH30-52 |
Working Width | 3.0m |
Deck | 4 |
Roller material | Q235B, φ102 special shaft tube |
Heating area length | 48m |
Cooling area length | 4m |
Veneer thickness and size | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 8-10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/h) | 6.7 |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power: 8KW（24pc） |
Traction motor | Power: 7.5KW，frequency control（4pc） |
Cold air blower | Power: 4KW（4pc） |
Air intake fan | Power: 15KW（2pc） |
10 ton biomass burner | Power: 16.5KW |
Total power | 285KW |
Actual electricity consumption | About 200kwh per hour |
Overall Dimension(L*W*H) | 63m×11m×3.5m |
Customer Case
Certification
Factory
Packaging & Shipping
