Veneer Machinery
Shine veneer machinery has the features of high productivity, energy efficiency, lowest drying cost and perfect drying effect. The veneer after drying has uniform moisture content, flat, no buckle or end waviness; free of splits and the surface is in good condition for gluing.
Type: Roller Veneer Dryer Machine
Working Width: 3m
Veneer thickness: 0.8-8mm
Heating Area Length: 38m
Drying capacity (m³/day) : 120
Veneer Water Moisture: Fresh veneer to about 0-15%
Cost: 6-12$/m3 (Labor+Fuel+Electricity)
Heat Source: Biomass Burner (Other options available)
Veneer Machinery
The 4deck veneer machinery features a high automation degree with an automatic feeder and veneer collection system. In addition, we have one automatic fuel feeder for the biomass burner to save manpower. Unlike steam veneer dryers or thermal oil veneer dryers, biomass burner can burn all kinds of waste wood, waste veneer, tree barks, straw chips, and so on. In this way, the veneer drying cost is significantly reduced as no need for coal, electricity, gas, or oil as fuel. Furthermore, it also solves the problem of waste accumulation in wood processing plants by burning waste wood. Typically the main body of the veneer machinery is divided into veneer in feeding section, veneer heating section, veneer cooling section, and veneer out feeding section.
Shine veneer machinery is smooth and the moisture content is uniform, the high-temperature rollers have direct contact with the wet veneer for heat transfer, the heat efficiency is high, the heat loss is small, and the heat loss is reduced. The selling price for veneer dried by roller veneer dryer is higher than natural air drying. The veneer machinery adopts frequency conversion to adjust feed speed according to your veneer thickness and moisture content to achieve an ideal drying effect.
Product Parameter of Veneer Machinery
Model No | GTH30-38 |
Working Width | 3.0m |
Deck | 4 |
Roller material | Q235B, φ102 special shaft tube |
Heating area length | 34m |
Cooling area length | 4m |
Veneer thickness and size | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 8-10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/day) | 120 |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power: 4KW（34pc） |
Traction motor | Power: 5.5KW，frequency control（4pc） |
Cold air blower | Power: 4KW（4pc） |
Air intake fan | Power: 15KW（2pc） |
10 ton biomass burner | Power: 16.5KW |
Total power | 161.5KW |
Actual electricity consumption | About 114kwh per hour |
Overall Dimension(L*W*H) | 49m×11m×3.5m |
Exhibition and Customer Visiting
Certification
The Factory
Our Services
Pre-sale services:
1) Provide the free consultation of all plywood production line
2) According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
3) Welcome to visit our factory.
Services during the sales:
1) Inspect the machine before leaving the factory.
2) Oversea install and debug the equipment.
3) Train the first-line operator.
After sale services:
1) 24 hours online service.
2) Provide the VIDEO with Install and debug the equipment.
3) Provide technical exchanging（Technical phone：+8615806625431）Door to door service is possible.
