Core Roller Veneer Drying
The core roller veneer drying heated with thermal oil has a relatively high temperature, high productivity, safe operation, and accurate temperature control. The veneer is dried more uniformly and the quality of the dried veneer is very good due to the stable temperature. The veneer drying machine features energy efficiency, is environmentally friendly, and has a high veneer drying output.
Core Roller Veneer Drying
The roller veneer drying has a variety of different drying configurations to suit a variety of drying needs are available. The length, width, and layers of the core veneer dryer can be designed and made for customers. The veneer roller dryer machine is durable in use and long service life. Shine Machinery is responsible for providing users the best drying solutions, not just the veneer dryer itself to ensure the higher drying capacity, energy efficiency, and less fuel cost. In line with the specific production capacity, the wood veneer drying machine can be customized to meet customers' needs.
Advantages of Core Roller Veneer Drying
1. The veneer after drying by Shine veneer dryer is smooth and the moisture content is uniform, and the high temperature drum has direct contact with the wet veneer for heat transfer, and the heat efficiency is high, the heat loss is small, and the heat loss is reduced. the selling price for veneer dried by roller veneer dryer is higher than natural drying.
2.The roller veneer drying machine adopts frequency conversion to adjust feed speed according to your veneer thickness and moisture content to achieve ideal drying effect .
3.Standardized production models, can make different sections or decks according to different capacity requirements, which can meet different customers' requirements.
4.Each section with heat exchanger, which can make full use of the heat and achieve the best drying effect.
Product Parameter of Core Roller Veneer Drying
Model No | GTH30-40 |
Working Width | 3m |
Deck | 2 |
Roller material | Q235B, φ89 steel pipe |
Heating area length | 36m |
Cooling area length | 4m |
Veneer thickness | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/24h) | 55-65cbm |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power:5.5KW（9pc） |
Traction motor | Power: 7.5KW，frequency control（2pc） |
Cold air blower | Power: 5.5KW（1pc） |
Air intake fan | Power : 11KW（2pc） |
4 ton biomass burner | Power: 16.5KW |
Total power | 114KW |
Actual electricity consumption | About 80kwh per hour |
Covered Space of the whole machine | 46M X 9M X 3M |
Customer Case
Certification
The Factory
Packaging & Shipping
