Core Veneer Drying

The biomass burner can burn all kinds of waste wood directly to reduce the drying cost mostly. Compared to steam type or heat conduction oil type veneer dryer, the drying cost is reduced greatly.

The biomass burner elimates the heat loss by directly heating air and supplying to the dryer instead of indirect heating of oil or water. 


  Связаться сейчас
информация о продукте

Core Veneer Drying


Shine core veneer drying has the higher drying capacity and higher energy efficiency as well as the less drying cost.  The 4 deck roller veneer drying machine is equipped with automatic feeding machine which ensure the high feeding rate for the wood veneer dryers.  The biomass burner or wood fired heater or hot blast stove is our product specially designed for the core veneer dryer line.  It directly heat air and supply to the veneer roller dryer with no heat loss instead of indirect heating of water or oil.

Shine roller veneer dryers can achieve the best drying results with features of uniform MC, no splits, no end waviness and in good condition before gluing for plywood production line.  The shine veneer roller dryer line has the quality guaranteed parts and the veneer drying machine is durable in use.


Core Veneer Drying


Features of Core Veneer Drying


1.The machine is the main apparatus in plywood industry.

2. It uses to remove moisture from the veneer.

3.The heat medium can be thermo oil ,Biomass burner and heat steam.

4.The whole machine can be divided into two parts: heating section and cooling section.

5.It includes mesh type, roller type, could be customized according to your requirements.


Core Veneer Drying


Product Parameters of Core Veneer Drying


Model No

GTH30-28

Working Width

3.0m

Deck

4

Roller material

Q235B, φ102 special shaft tube

Heating area length

24m

Cooling area length

4m

Veneer thickness and size

0.8-8mm

Veneer water moisture

Fresh veneer to about 8-10%

Heating material & drying temperature

Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent.

Drying capacity (m³/day)

80-85

Veneer transport speed

5-22m/min,16A chain

Hot air blower

Power: 4KW(24pc)

Traction motor

Power: 5.5KW,frequency control(4pc)

Cold air blower

Power: 4KW(4pc)

Air intake fan

Power: 11KW(1pc)

10 ton biomass burner

Power: 16.5KW

Total power

161.5KW

Actual electricity consumption

About 114kwh per hour

Overall Dimension(L*W*H) 

43m×12m×3.5m


Core Veneer Drying


Customer Case


Customer Case


The Factory


The Factory


Packaging & Shipping


Packaging & Shipping

Отправьте нам свое сообщение
x