Heat Thermal Oil Veneer Dryer Machine
Heat thermal oil veneer dryer machine is a new generation wood veneer drying machine. It adopts the latest international pressure contact veneer drying technology to ensure the veneer is heated evenly. It can be used to dry rubber wood, eucalyptus, birch, teak, all kinds of hard wood and soft wood veneer etc.
Heat Thermal Oil Veneer Dryer Machine
Shine Roller type veneer dryer machine which has the advantages of simple operation, safety and practicality, stable operation, easy maintenance, hot-pressing-levelling--drying once completed, etc. The use of hot air circulation has greatly reduced the operating costs of enterprises, improved the quality of sheet materials and increased the production volume. The roller plays a role in ironing the veneer. After using Shine wood core veneer dryer, the veneer is flat and the moisture content is relatively uniform. When the veneer is located between two roller sets, the lateral direction can be freely contracted, the occurrence of cracks is reduced, and the drying quality is good. The heat dissipation process is carried out in a flat state. In the benign physical process of wood shrinkage, the veneers do not warp and deform, the breakage rate is low, and the yield rate is high.
Heat conducting oil heating veneer dryer is one of the Shine roller veneer dryer. Except for heat conducting oil heating type, we have have biomass burner heating model, electricity , steam ,coal and other heating models to choose.
Product Parameters of Heat Thermal Oil Veneer Dryer Machine
Working Width | 3m |
Deck | 2 |
Roller material | Q235B, φ89 steel pipe |
Heating area length | 40m |
Cooling area length | 4m |
Veneer thickness | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/24h) | 60-70cbm |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power:11KW（10pc） |
Traction motor | Power: 7.5KW，frequency control（2pc） |
Cold air blower | Power: 11KW（1pc） |
Air intake fan | Power : 11KW（2pc） |
Customer Visiting
The Factory
Packaging & Shipping
