Veneer Mesh Belt Dryer
Veneer mesh belt dryer is a professional drying machine specially for the face veneer thickness 0.2-0.4mm. It is a very good dryer machine for the face veneer making factory. Usually the continuous veneer ribbon is dried firstly and then cut into required size to get the biggest yield. The face veneer after drying has the uniform moisture content, flat with no buckle or end waviness. The surface is in good condition before gluing into plywood.
Veneer Mesh Belt Dryer
The veneer mesh belt dryer is designed to handle the drying process of face veneer, back veneer and long core veneer.For process the surface veneer and long core veneer, this veneer dryer can avoid the break of the veneer, then can raise the veneer utilization ratio and production output.All outfitted air blower and screen are the high quality production, so it can increase the durability and useful life of the machine.We can design the machine upon our customer`s requirement.
Product Parameters of Veneer Mesh Belt Dryer
1. This machine adopts a centrifugal blower and radiator of steel & aluminum composite type.
2. The blower is mounted on the top of the machine and it has the features of large air volume and stability.
3. The radiator has the features of good wind resistance and a large heat radiation area.
4. The thermal air blower is mounted on each side of the machine. When the heated airflow comes into the special spray tanks, they could be sprayed evenly onto the veneer surface with high speed. So that the veneer could reach perfect moisture content and get almost the same moisture content on both sides of the veneer.
Main Technical Specifications
Model No. | Shine-20 |
Working Width | 3000mm |
Layers | 1 deck |
Heating Section | 6 sections X 3000mm=18000mm |
Cooling Section | 1 section X 2000mm=2000mm |
Total Power | 31.7KW |
Transmission Motor | 5.5kw X 1 pc=5.5kw frequency control |
Hot Air Fan | 4kw X 6 pcs=24kw |
Cold Air Fan | 2.2kw X 1pc=2.2kw |
Radiator | 6 units L 2000mm X W 300mm X H 900mm |
Transmission Speed | 1-30m/min |
Heating Medium | Steam or Thermal Oil |
Drying Temperature | 150-180℃ |
Thermal Energy Consumption | 60X104 Kcal Steam 1 T |
Drying Thickness | 0.2-1.2mm |
Initial Moisture Content | 60-80% |
Final Moisture Content | about 10% |
Drying Capacity | 0.5-1M3/h |
Overall Dimension | L 23m(infeed 1.5m+drying and cooling 20m+discharge 1.5m) X W 4.36m X H 2.2m |
Container and Weight | 1 X 40' HQ around 23000Kgs |
Customer Case
The Factory
Packaging & Shipping
