Rotary Cut Veneer Drying
Shine rotary cut veneer drying can dry 0.8-8mm veneer and plywood.The veneer after drying by Shine wood veneer dryer is smooth and the moisture content is uniform, and the surface is in good condition for gluing. Veneer roller dryer with highly heat efficiency and the heat loss is small.The most merits of veneer drying machine is that reduce cost greatly. .Biomass veneer dryers machine can burn waste wood directly to reduce fuel cost to the most.
Rotary Cut Veneer Drying
The rotary cut veneer drying has a variety of different drying configurations to suit a variety of drying needs are available. The length, width, and layers of the core veneer dryer can be designed and made for customers. The veneer roller dryer machine is durable in use and long service life. Shine Machinery is responsible for providing users the best drying solutions, not just the veneer dryer itself to ensure the higher drying capacity, energy efficiency, and less fuel cost. In line with the specific production capacity, the wood veneer drying machine can be customized to meet customers' needs.
Shine 2 Deck rotary cut veneer drying adopts frequency conversion control, which can adjust the transmission speed and temperature according to different veneer thickness and moisture content to achieve the ideal drying effect. Low failure rate and reduced downtime.
Product Parameters of Rotary Cut Veneer Drying
Model No | GTH30-36 |
Working Width | 3m |
Deck | 2 |
Roller material | Q235B, φ89 steel pipe |
Heating area length | 32m |
Cooling area length | 4m |
Veneer thickness | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/24h) | 50-60cbm |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power:5.5KW（8pc） |
Traction motor | Power: 7.5KW，frequency control（2pc） |
Cold air blower | Power: 5.5KW（1pc） |
Air intake fan | Power : 7.5KW（2pc） |
4 ton biomass burner | Power: 16.5KW |
Total power | 92KW |
Actual electricity consumption | About 65kwh per hour |
Covered Space of the whole machine | 42M X 9M X 3M |
Customer Case
The customer evaluation
The Factory
Packaging & Shipping
