Mesh Belt Dryer
Mesh belt dryer is usually used for the continuous ribbions before cutting. The mesh belt dryer is designed especially for the face veneer at the thickness of 0.2-1.2mm. The equipment is flexible in configuration, and there are many materials for drying at one time, and it can be continuously produced and dried, which is convenient to use and greatly reduces labor.
Mesh Belt Dryer
For the thin veneer, the stainless steel mesh belt dryer will be more suitable. The mesh belt veneer dryer is used for drying veneers with rotary cutting and slicer and it is designed specially to dry the very thin face veneer typically at 0.2-1.2mm thickness. The drying capacity of 26m 2deck veneer dryer can achieve 1.5-2m³/h. The veneer after drying is flat, the moisture content is up to national standard. We can customize the dryer models and design the right dryer for customers according to the specific drying capacity, veneer thickness, and moisture content requirement.
Features of Mesh Belt Dryer
1. Constant temperature control, drying effect is good. Drying room temperature control method for closed loop control,
electrical cabinet drying room temperature real-time control, venner is always in most ideal drying temperature range.
2. Energy saving high efficient, full use of the heat. The industry's leading heat using the technology of hot air blower heat recycling to lumber drying process,
produced by the waste heat of hot air stove auxiliary raise drying room temperature.
4.The high degree of automation, operation easy.venner by drying type roller conveyor, and level off, effectively greatly improve the quality of the plate.
Exhibition and Customer Visiting
The Factory
Packaging & Shipping
