Plywood Veneer Dryer Machine

Type: Plywood Veneer Dryer Machine

Working Width: 3m

Veneer thickness: 0.8-8mm

Heating Area Length: 48m

Drying capacity (m³/day) : 150-160

Veneer Water Moisture: Fresh veneer to about 0-15%

Cost: 6-12$/m3 (Labor+Fuel+Electricity)

Heat Source: Biomass Burner (Other options available)


  Связаться сейчас
информация о продукте

Plywood Veneer Dryer Machine


This 4 deck automatic plywood veneer dryer machine was purchased by our Romanian customer. Now it has been installed and is waiting for trial operation. It is equipped with automatic board winding and semi-automatic board winding devices, which saves labor cost. The customer is very satisfied with the equipment. Later expansion of production will continue to purchase our veneer dryer.


Plywood Veneer Dryer Machine


Customers are also worried about the product before purchase, until they go to our Latvian customer's factory to see the actual operation of our equipment, and are very satisfied with the performance and quality of the veneer dryer, and the customer immediately decided to purchase our roller dryer after going back.

The continuous roller dryer uses a new axial flow fan to reduce the power of the whole machine, save energy and power, and the maximum output can reach more than 300 m³/day, according to your actual situation, to provide you with a more suitable for your veneer drying solution.


Plywood Veneer Dryer Machine


Product Parameters of Plywood Veneer Dryer Machine


Model No

GTH30-52

Working Width

3.0m

Deck

4

Roller material

Q235B, φ102 special shaft tube

Heating area length

48m

Cooling area length

4m

Veneer thickness and size

0.8-8mm

Veneer water moisture

Fresh veneer to about 8-10%

Heating material & drying temperature

Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent.

Drying capacity (m³/h)

7-8

Veneer transport speed

5-22m/min,16A chain

Hot air blower

Power: 4KW(48pc)

Traction motor

Power: 5.5KW,frequency control(4pc)

Cold air blower

Power: 4KW(4pc)

Air intake fan

Power: 15KW(2pc)

10 ton biomass burner

Power: 16.5KW

Total power

284.5KW

Actual electricity consumption

About 200kwh per hour

Overall Dimension(L*W*H) 

63m×11m×3.5m


Plywood Veneer Dryer Machine


Customer Case


Customer Case


The Factory


The Factory


Packaging & Shipping


Packaging & Shipping

Отправьте нам свое сообщение
x