continuous mesh belt dryer
Continuous mesh belt dryer is usually used for the continuous ribbions before cutting. The mesh belt dryer is designed especially for the face veneer at the thickness of 0.2-1.2mm. The equipment is flexible in configuration, and there are many materials for drying at one time, and it can be continuously produced and dried, which is convenient to use and greatly reduces labor.
continuous mesh belt dryer
The continuous mesh belt dryer which is one of the main equipment in veneer and plywood production and can be used for continuous drying operation. It is used for drying veneers with rotary cutting and slicer and it is designed especially to dry the very thin face veneer typically at 0.2-1.2mm thickness. It is composed of four parts, which are divided into feeding area, heating area, cooling area and discharging area. It has features of high efficiency, low energy consumption, and better meets the production process of the product.
Product Parameters of continuous mesh belt dryer
Model No. | Shine-20 |
Working Width | 3000mm |
Layers | 2 deck |
Heating Section | 9 sections×2000mm＝18000mm |
Cooling Section | 1 section×2000mm＝2000mm |
Veneer feeding section | 1500mm |
Veneer discharge section | 1500mm |
Total Power | 47KW |
Heating Medium | Steam or thermal oil |
Drying temperature | 150-180℃ |
Thermal energy consumption | 120×104 Kcal Steam 2-3T |
Drying Thickness | 0.2-4mm |
Final moisture content | 8-12% |
Drying capacity(m³/h) | 1-1.5 |
Overall Dimension | L 23m(feeding1.5m+drying and cooling 21m+discharge 1.5m)×W 4.36m×H 2.2m |
Container | 1X40’HQ+1X20’HQ |
Customer Case
The Factory
Packaging & Shipping
