Automatic Veneer Dryer Machine
Type: Roller Veneer Dryer
Working Width: 3m
Veneer thickness: 0.8-8mm
Heating Area Length: 36m
Drying capacity (m³/day) : 55-65
Veneer Water Moisture: Fresh veneer to about 0-15%
Cost: 6-12$/m3 (Labor+Fuel+Electricity)
Automatic Veneer Dryer Machine
Veneer dryer machine adopts automatic electric control and frequency conversion system, which can adjust the transmission speed and temperature automatically according to different veneer thickness and moisture content to achieve and ideal drying effect. Equipped with automatic veneer feeder and automatic collection system, which not only improves the drying efficiency but also saves labor cost mostly.
In addition to the uniform moisture content, the veneer dried by the shine veneer dryer is flat with no buckle or end waviness, free of splits, cracks. Shrinkage is kept to a minimum during the drying process of the wood veneer dryer machine. So after drying, the veneer is in a very good condition before gluing for plywood making machine.
Product Parameters of Automatic Veneer Dryer Machine
Model No | GTH30-40 |
Working Width | 3m |
Deck | 2 |
Roller material | Q235B, φ89 steel pipe |
Heating area length | 36m |
Cooling area length | 4m |
Veneer thickness | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/24h) | 55-65cbm |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power:5.5KW（10pc） |
Traction motor | Power: 7.5KW，frequency control（2pc） |
Cold air blower | Power: 5.5KW（1pc） |
Air intake fan | Power : 11KW（2pc） |
4 ton biomass burner | Power: 16.5KW |
Total power | 108.5KW |
Actual electricity consumption | About 76kwh per hour |
Covered Space of the whole machine | 46M X 9M X 3M |
The Factory
Packaging & Shipping
