4 deck jet roller veneer dryer

Type: Roller Veneer Dryer

Working Width: 3m

Veneer thickness: 0.8-8mm

Heating Area Length: 32m

Drying capacity (m³/day) : 80-90

Veneer Water Moisture: Fresh veneer to about 0-15%

Cost: 6-12$/m3 (Labor+Fuel+Electricity)

Heat Source: Biomass Burner (Other options available)

If you want to know more details about the machine (performance, detailed parameters, videos, etc.), please contact us(WhatsApp: +8615806625431)


  Связаться сейчас
информация о продукте

4 Deck Jet Roller Veneer Dryer


SHINE Roller veneer Dryer adopts the new axial flow fan, the whole machine power is reduced by Thirty-eight percent, low energy consumption, high output, the heat source can be selected according to the situation (biomass burner, thermal oil, natural gas, etc.), choose Shine to provide you with the best solution of low-cost veneer dryer.


4 Deck Jet Roller Veneer Dryer.jpg


Advantages of Veneer Dryer Machine


1.  The well-developed heat exchange system fully improves the energy utilization rate and saves unnecessary energy waste.

2.  The control cabinet has automatic temperature control and speed regulation system, which can accurately control the final moisture content.  Simple operation and low failure rate.

3.  The temperature in the burner is 40-60 ℃ higher than that of the traditional dryer (steam, thermal oil), and the temperature is controlled at 140-180 ℃, which shortens the drying time and increases the output.

4.  After drying, the veneer is smooth, with no cracks, wrinkles, or end ripples.

5.  Shrinkage and hardening are kept to a minimum and veneer collapse and honeycomb structure are avoided.

6.  We have a professional R&D team which can design different models according to customer’s special requirement.

7.  The perfect after-sale service team can supply 24 hours online service.


Roller Veneer Dryer.jpg


Product Parameters of Roller Veneer Dryer


Model No

GTH30-28

Working Width

3.0m

Deck

4

Roller material

Q235B, φ102 special shaft tube

Heating area length

24m

Cooling area length

4m

Veneer thickness and size

0.8-8mm

Veneer water moisture

Fresh veneer to about 8-10%

Heating material & drying temperature

Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent.

Drying capacity (m³/day)

80-85

Veneer transport speed

5-22m/min,16A chain

Hot air blower

Power: 4KW(24pc)

Traction motor

Power: 5.5KW,frequency control(4pc)

Cold air blower

Power: 4KW(4pc)

Air intake fan

Power: 11KW(1pc)

10 ton biomass burner

Power: 16.5KW

Total power

161.5KW

Actual electricity consumption

About 114kwh per hour


Customer Case


Customer Case.jpg


The installation


The installation.jpg


The Factory


The Factory.jpg


Packaging & Shipping


Packaging & Shipping.jpg

Отправьте нам свое сообщение
x