rotary veneer drying machine
The power of the veneer dryer is reduced by 38%, which saves energy and electricity. Different models and configurations can be customized according to the actual situation of the customer.
Type: Roller Veneer Dryer
Working Width: 3m
Veneer thickness: 0.8-8mm
Heating Area Length: 32m
Drying capacity (m³/day) : 110-120
Veneer Water Moisture: Fresh veneer to about 0-15%
Cost: 6-12$/m3 (Labor+Fuel+Electricity)
Heat Source: Biomass Burner (Other options available)
24 hours online service（WhatsApp：+8615806625431）
Rotary Veneer Drying Machine
This 2 deck veneer dryer uses a thermal oil furnace for heating (other heat sources can be selected), equipped with a semi-automatic feeding and collecting systems, to dry all kinds of wood. The dried boards are flat and wrinkle-free. The output is 2.5m³ per hour. It has the characteristics of high productivity, high energy efficiency, low drying cost and good drying effect.
Advantages of Veneer Drying Machine
1. The well-developed heat exchange system fully improves the energy utilization rate and saves unnecessary energy waste.
2. The control cabinet has automatic temperature control and speed regulation system, which can accurately control the final moisture content. Simple operation and low failure rate.
3. The temperature in the burner is 40-60 ℃ higher than that of the traditional dryer (steam, thermal oil), and the temperature is controlled at 140-180 ℃, which shortens the drying time and increases the output.
4. After drying, the veneer is smooth, with no cracks, wrinkles, or end ripples.
5. Shrinkage and hardening are kept to a minimum and veneer collapse and honeycomb structure are avoided.
6. We have a professional R&D team which can design different models according to customer’s special requirement.
7. The perfect after-sale service team can supply 24 hours online service.
Product Parameters of Veneer Drying Machine
Model No | GTH30-44 |
Working Width | 3m |
Deck | 2 |
Roller material | Q235B, φ89 steel pipe |
Heating area length | 40m |
Cooling area length | 4m |
Veneer thickness | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/24h) | 60-70cbm |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power:5.5KW（10pc） |
Traction motor | Power: 7.5KW，frequency control（2pc） |
Cold air blower | Power: 5.5KW（1pc） |
Air intake fan | Power : 11KW（2pc） |
6 ton biomass burner | Power: 16.5KW |
Total power | 114KW |
Actual electricity consumption | About 80kwh per hour |
Customer Case
The Factory
Packaging & Shipping
