Plywood Roller Dryer Machine
Veneer Dryer Features：
1.Customizable (customized one-stop service)
2.Energy saving and power saving, using axial flow fans, the power of the whole machine is reduced by 38%
3.Stable equipment and low failure rate
4.Imported accessories, using thicker high-quality steel
5.Professional factory production
Plywood Roller Dryer Machine
The 2 deck veneer dryer is cost-effective, energy-saving and power-saving. It adopts step-by-step heat exchange. The specifications of the heat exchanger in each section are different. The hot air in the heat exchanger can be evenly distributed to the veneer. The moisture content of the veneer after drying is uniform and flat, without wrinkles or end ripples, cracks, and the surface bonding state is good, which fully improves the energy utilization rate.
The veneer dryer consists of two layers of conveying rollers. Each time the roller conveys the veneer through the upper and lower pressure rollers, it ensures that there is no veneer jam and the equipment runs continuously. The equipment running speed is 5-22 meters frequency conversion control (freely adjustable).
The veneer drying process consists of two parts: blowing heating by the blowing pipe and contact heating by the upper and lower pressure rollers. Double heating improves the heating efficiency.
Product Parameters of Roller Dryer Machine
Model No | GTH30-56 |
Working Width | 3m |
Deck | 2 |
Roller material | Q235B, φ89 steel pipe |
Heating area length | 52m |
Cooling area length | 4m |
Veneer thickness | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/24h) | 85-95cbm |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power:5.5KW（13pc） |
Traction motor | Power: 7.5KW，frequency control（2pc） |
Cold air blower | Power: 5.5KW（1pc） |
Air intake fan | Power : 15KW（2pc） |
6 ton biomass burner | Power: 16.5KW |
Total power | 138.5KW |
Actual electricity consumption | About 97kwh per hour |
Customer Case of veneer dryer
The customer evaluation
Our Services
Pre-sale services:
1) Provide the free consultation of all plywood production line
2) According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
3) Welcome to visit our factory.
Services during the sales:
1) Inspect the machine before leaving the factory.
2) Oversea install and debug the equipment.
3) Train the first-line operator.
After sale services:
1) 24 hours online service.
2) Provide the VIDEO with Install and debug the equipment.
3) Provide technical exchanging（Technical phone：+8615806625431）Door to door service is possible.
The Factory
Packaging & Shipping
