Conveyor Veneer Drying machine
Veneer Dryer Features：
1.Energy saving and power saving, using axial flow fans, the power of the whole machine is reduced by 38%
2.Stable equipment and low failure rate
3.Professional factory production
4.The roller uses a φ89mm special shaft tube, which is corrosion-resistant and rust-proof
5.Customizable (customized one-stop service)
Conveyor Veneer Drying machine
The design of the hot air continuous roller veneer dryer is based on the world's advanced continuous pressure contact veneer drying technology. The veneer dryer adopts variable frequency speed regulation, and the feeding speed can be adjusted according to the veneer thickness and moisture content to achieve the ideal drying effect. The higher roller wall thickness ensures a longer service life without deformation, and the veneer after drying is smoother. The veneer dryer consists of a transmission room, a drying room, a cooling room and other parts. The equipment has the advantages of low investment and high cost performance. We can design the veneer dryer according to customer needs.
Advantages of Veneer Dryer Machine
1. The well-developed heat exchange system fully improves the energy utilization rate and saves unnecessary energy waste.
2. The control cabinet has automatic temperature control and speed regulation system, which can accurately control the final moisture content. Simple operation and low failure rate.
3. The temperature in the burner is 40-60 ℃ higher than that of the traditional dryer (steam, thermal oil), and the temperature is controlled at 140-180 ℃, which shortens the drying time and increases the output.
4. After drying, the veneer is smooth, with no cracks, wrinkles, or end ripples.
5. Shrinkage and hardening are kept to a minimum and veneer collapse and honeycomb structure are avoided.
6. We have a professional R&D team which can design different models according to customer’s special requirement.
7. The perfect after-sale service team can supply 24 hours online service.
Product Parameters of Veneer Drying machine
Model No | GTH30-48 |
Working Width | 3m |
Deck | 2 |
Roller material | Q235B, φ89 steel pipe |
Heating area length | 44m |
Cooling area length | 4m |
Veneer thickness | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/24h) | 70-80cbm |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power:5.5KW（11pc） |
Traction motor | Power: 7.5KW，frequency control（2pc） |
Cold air blower | Power: 5.5KW（1pc） |
Air intake fan | Power : 11KW（2pc） |
6 ton biomass burner | Power: 16.5KW |
Total power | 119.5KW |
Actual electricity consumption | About 84kwh per hour |
Customer Case
Shine veneer drying machine has been exported to more than 20 countries and regions, with agents in more than different countries. Users can visit the case site nearby.
The Factory
Shine Machinery is a large-scale manufacturer specializing in R&D of wood veneer drying machine and veneer sheet peeling equipment. With decades fo growth, Shine Machinery has continuously improvved our equipment based on customer feedback. From out first dryer in 1999 to today's 4th generation of eco-friendly veneer prodution line, we are dedicated to relentless innovation, providing superior soutions.
The installation
We will send professional engineers to your factory to guide the installation and help train your factory workers to operate the equipment. The engineers will not return until the equipment is operating normally.
Packaging & Shipping
