Roller Plywood Veneer Drying
1.Professional factory production
2.The roller uses a φ89mm special shaft tube, which is corrosion-resistant and rust-proof
3.Energy saving and power saving, using axial flow fans, the power of the whole machine is reduced by 38%
4.Stable equipment and low failure rate
5.Convenient installation (installation can be completed in 25-30 days)
The Shine 2 deck veneer dryer is equipped with a biomass burning furnace, which can directly burn various waste wood, greatly reducing the drying cost, and can also be equipped with other heat sources (heat transfer oil, natural gas, steam). The dried boards are flat, free from cracking, warping and even in moisture content. The newly improved fan reduces the overall power by 38% compared with the traditional dryer and reduces power consumption. We can provide you with a suitable dryer according to your needs, and the installation and after-sales problems are guaranteed. If you want to know more about our products, please contact our technical staff +8615806625431.
Advantages of Veneer Dryer Machine
1. The well-developed heat exchange system fully improves the energy utilization rate and saves unnecessary energy waste.
2. The control cabinet has automatic temperature control and speed regulation system, which can accurately control the final moisture content. Simple operation and low failure rate.
3. The temperature in the burner is 40-60 ℃ higher than that of the traditional dryer (steam, thermal oil), and the temperature is controlled at 140-180 ℃, which shortens the drying time and increases the output.
4. After drying, the veneer is smooth, with no cracks, wrinkles, or end ripples.
5. Shrinkage and hardening are kept to a minimum and veneer collapse and honeycomb structure are avoided.
6. We have a professional R&D team which can design different models according to customer’s special requirement.
7. The perfect after-sale service team can supply 24 hours online service.
Product Parameters of Plywood Veneer Drying
Model No | GTH30-36 |
Working Width | 3m |
Deck | 2 |
Roller material | Q235B, φ89 steel pipe |
Heating area length | 32m |
Cooling area length | 4m |
Veneer thickness | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/24h) | 50-60cbm |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power:5.5KW（8pc） |
Traction motor | Power: 7.5KW，frequency control（2pc） |
Cold air blower | Power: 5.5KW（1pc） |
Air intake fan | Power : 7.5KW（2pc） |
4 ton biomass burner | Power: 16.5KW |
Total power | 92KW |
Actual electricity consumption | About 65kwh per hour |
Customer Case
The Factory
Packaging & Shipping
