Veneer Core Dryer Machine
1.Customizable (customized one-stop service)
2.The roller uses a φ89mm special shaft tube, which is corrosion-resistant and rust-proof
3.Stable equipment and low failure rate
4.Has been exported to Europe, South America, Asia, Africa and other regions, and can be viewed in real time
5.The veneer is flat and wrinkle-free after drying
6.Diverse heat source options
Veneer dryers offer high efficiency at a lower drying cost. Our veneer dryer feature high production efficiency, energy saving, and good drying effects. The 4-deck veneer dryer can be equipped with an automatic feeding device to feed the veneer into the dryer, greatly saving labor costs. The dried veneer has a uniform moisture content, is flat without snaps or end waves. Shine veneer dryers require less maintenance, veneer does not get stuck, and reduces downtime. Shine biomass veneer dryers can meet users' special requirements and achieve ideal drying effects.
Advantages of veneer dryer
1、The hot air fan and cold air fan of the dryer adopt the latest axial flow fan, which reduces power consumption and greatly reduces the power of the whole machine, which can further reduce the later operation cost.
2、The Shine heat exchanger adopts step-by-step heat exchange. The specifications of each heat exchanger are different, and the hot air inside can be evenly distributed to the single board. After drying, the moisture content of the veneer is uniform, smooth, without wrinkles or end ripples, without cracks, and the surface is in good glued state.
3、The roller veneer dryer adopts frequency conversion speed regulation, which can adjust the feeding speed according to your veneer thickness and moisture content, so as to achieve the ideal drying effect.
4、The fuel source can be waste wood or bark after peeling, which can greatly reduce fuel costs for users.
5、Perfect after-sales service system, 24-hour online service, remote operation, so that customers can rest assured after installation. Regular follow-up services for old customers, sufficient and timely supply of spare parts.
Product Parameters of Veneer Dryers
Model No | GTH30-36 |
Working Width | 3.0m |
Deck | 4 |
Roller material | Q235B, φ102 special shaft tube |
Heating area length | 32m |
Cooling area length | 4m |
Veneer thickness and size | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 8-10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/day) | 110 |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power: 4KW（32pc） |
Traction motor | Power: 5.5KW，frequency control（4pc） |
Cold air blower | Power: 4KW（4pc） |
Air intake fan | Power: 15KW（2pc） |
10 ton biomass burner | Power: 16.5KW |
Total power | 212.5KW |
Actual electricity consumption | About 149kwh per hour |
Exhibition and Customer Visiting
The customer evaluation
The Factory
Packaging & Shipping
