Birch Veneer Dryer

1.Professional factory production

2.Imported accessories, using thicker high-quality steel

3.Convenient installation (installation can be completed in 25-30 days)

4.Stable equipment and low failure rate

5.The main electrical components are all well-known domestic and foreign brands

6.The veneer is flat and wrinkle-free after drying


  Связаться сейчас
информация о продукте

The roller veneer dryer adopts advanced heat exchange structure, which has high heat exchange efficiency and small heat loss. The core plate dryer can be heated by steam boiler, thermal oil heater or biomass burner to save fuel cost to the greatest extent. 

The veneer dryer is composed of inlet, drying area, cooling area and outlet. The size of the dryer can be customized according to production capacity, process and space.(Both the front and rear feeding veneer and receiving veneer can be customized according to customer needs)


Veneer Dryer.jpg


Advantages of Veneer Dryer


1、The hot air fan and cold air fan of the dryer adopt the latest axial flow fan, which reduces power consumption and greatly reduces the power of the whole machine, which can further reduce the later operation cost.

2、The Shine heat exchanger adopts step-by-step heat exchange. The specifications of each heat exchanger are different, and the hot air inside can be evenly distributed to the single board. After drying, the moisture content of the veneer is uniform, smooth, without wrinkles or end ripples, without cracks, and the surface is in good glued state.

3、The roller veneer dryer adopts frequency conversion speed regulation, which can adjust the feeding speed according to your veneer thickness and moisture content, so as to achieve the ideal drying effect.

4、The fuel source can be waste wood or bark after peeling, which can greatly reduce fuel costs for users.

5、Perfect after-sales service system, 24-hour online service, remote operation, so that customers can rest assured after installation. Regular follow-up services for old customers, sufficient and timely supply of spare parts.


Veneer Dryer.jpg


Product Parameters of Veneer Dryer


Model No

GTH30-40

Working Width

3m

Deck

2

Roller material

Q235B, φ89 steel pipe

Heating area length

36m

Cooling area length

4m

Veneer thickness

0.8-8mm  

Veneer water moisture

Fresh veneer to about 10%

Heating material & drying temperature

Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent.

Drying capacity (m³/24h)

55-65cbm  

Veneer transport speed

5-22m/min,16A chain

Hot air blower

Power:5.5KW(9pc)

Traction motor

Power: 7.5KW,frequency control(2pc)

Cold air blower

Power: 5.5KW(1pc)

Air intake fan

Power : 11KW(2pc)

4 ton biomass burner

Power: 16.5KW

Total power

108.5KW

Actual electricity consumption

About 76kwh per hour 


Veneer Dryer.jpg


Project Case


Project Case.jpg


The Factory


The Factory.jpg


Packaging & Shipping


Packaging & Shipping.jpg

Отправьте нам свое сообщение
x