Plywood Veneer Drying Machine
Shine veneer dryer is the only dryer in China with its own heat source. Shenghuai can not only produce veneer dryer but also have our patented heat source---biomass burner. Low heat loss, high thermal efficiency, direct heating of air, one heat exchange, not indirect heating of water or heat transfer oil, eliminating heat loss.
Veneer thickness:0.6-8mm
Veneer water moisture:Fresh veneer to about 10%
Actual electricity consumption:About 110kwh per hour
Product Description of Plywood Veneer Drying Machine
Shine plywood veneer drying machine adopts automatic electric control and frequency conversion system, which can adjust the transmission speed and temperature automatically according to different veneer thickness and moisture content to achieve and ideal drying effect. The dried veneer is of good quality (the moisture content is uniform, flat, no wrinkles or end ripples, no cracks, and the surface is in a good state of gluing.)The equipment has been exported to more than 100 countries, and many different project case sites can be visited.
Plywood Veneer Drying Machine in Indonesia Customer's Factory
Plywood Veneer Drying Machine in Congo Customer's Factory
biomass burner
The patented moisture exhaust system: it is installed on the top of the dryer for the north, especially the cold area, to quickly and quickly discharge the moisture inside the dryer to the outside of the workshop, avoiding the pre-condensation of steam caused by the temperature difference between the inside and outside of the dryer, and Keeps dryer interior dry and pressure balanced.
Product Parameters of Plywood Veneer Drying Machine
Model No | GTH30-40 |
Working Width | 3m |
Deck | 2 |
Heating area length | 36m |
Cooling area length | 4m |
Veneer thickness | 0.6-8mm |
Veneer water moisture | Fresh veneer to about 10% |
Heating material & drying temperature | Waste wood, 140-200℃C adjustable. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/day) | 55-65cbm |
Veneer transport speed | 5-22m/min，16A chain |
Hot air blower | Power:5.5KW（9pc） |
Traction motor | Power: 7.5KW，frequency control（2pc） |
Cold air blower | Power: 5.5KW（1pc） |
Air intake fan | Power : 11KW（2pc） |
4 ton biomass burner | Power: 16.5KW |
Total power | 108.5KW |
Actual electricity consumption | About 110kwh per hour |
Video of Plywood Veneer Drying Machine
Project Case
Certification
Customer Visiting and Factory
Customers from all over the world visit
Our Services
Pre-sale services:
1) Provide the free consultation of all Core Veneer Dryer Machine
2) According to the clients' special requirement, offering the reasonable plan and free design to help to select the equipment.
3) Welcome to visit our factory
Services during the sales:
1) Inspect the machine before leaving the factory.
2) Oversea install and debug the equipment
3) Train the first-line operator.
After sale services:
1) 24 hours online service
2) Provide the VIDEO with Install and debug the equipment
3) Provide technical exchanging
4) Door to door service is possible
Product Packaging And Transportation
